MaxiIM IM608 add key for Toyota Auris 2007 Via OBD

 

This post show you guide on how to use  Autel IM608 key programmer to add a blade new key for Toyota Auris 2007

Procedure
Connect Autel IM608 Tablet to your car via OBD
Insert the working blade key into the key slot
Turn the key into position 1.

IMMO >> Accord >> Blade key >>Europe >>AURIS HV >>Blade key











System data initizlizing.please wait...
Then confirm vehicle profile,tab YES to continue

Tab IMMO Status scan
Turn the ignition on while Establishing vehicle communication


Communication status Tips
The tester can not communicate with the vehicle ECU

• 1. Confim the ignition swith is turned on
• 2.Check the test cable is connected well
• 3.Check the vehicle battery has power
• 4.Confirm if the vehicle is equiqqed with this system
• 5.Decribe your proble and upload you log .

Tab ESC

Tab IMMO Status scan again
Establishing vehicle communication...




>> Add Key>> start


Step1 Master key verfication


Add key guided : insert the learned master key and turn the igition on press OK to contiue
Step2 Key programmming

Add key guided : Remove the key , insert the key to be learned into the iginiation lock (Just insert the key in the
off position and do not turn it to the on position!)wait for about 75s...


Add Key succeed !then Tab ESC


Tab Rescan,here has two master keys 



Check the new blade, it work!Autel IM608 add Toyota Auris 2007 New Key succeed!
Done!

https://www.autelim608.co.uk/