Autel Maxisys Elite ESP / ABS Module Coding On Benz GLK350

Hey guys,auteldiag.com is gonna to use Autel MaxiSys Elite diagnostic tool to program a 2009 Mercedes Benz GLK350 VIN in ESP module. This vehicle was replaced the ABS module and has the warning message right on the dashboard.



As you can see, this is the fault codes 7266 and 6301 stored in Autel MaxiSys Elite. It says the VINs in the control modules “N30/4(ESP control module)” and “N73(EIS/EZS control module)” do not correspond. So I am going to change the VIN in the ESP module.

Exit the reading codes page,



Control unit adaptations >> Configuration >> Manual setting >> Special function VIN

 

Do you want to transfer VIN number to control module “N30/4(ESP control module)”?

This is the current VIN number, press “Yes”.



Turn off the ignition, press “OK”.



Turn on the ignition, press “OK”.



VIN presently stored in the control module. Press “Continue”.

 

 

 

 

 

 

 



Complete!



Okay, let me cycle the ignition to see what happens. To see if that warning message come back. Alright, no message for the ESP module, it has gone!



Let’s go back to read the trouble codes again.

It says: “ No fault codes detected.”

This is the first time I did to program a Mercedes Benz ESP VIN, and I’m glad to see this Autel MaxiSys Elite Scan Tool can do the job. It is quite easy.

Source:http://blog.auteldiag.com/autel-maxisys-elite-program-2009-mercedes-glk350-esp-vin/

How To Install Autel XP400 PC Programmer Software

This post is showing the procedure of how to install Autel XP400 Adapter PC programmer and make a quick start demonstration for reference.



Installation Procedure



Step1. Download Autel XP400 PC programmer.



Go to www.autel.com to sign in, click “PC Suite” and find “PC Programmer” to download.





Step2. Installation



Run the setup file.



After completing the setup file, it will prompt to install device driver software.



Click “Finish” >> “OK”



Wait a moment for device driver software installed successfully.





 

We can open Computer Management to check if the device driver software was installed normally.



Installation was done!





Quick Start Overview



Let’s start XP400 PC programmer now, click “Open”.



Select language, click “OK”.



There are several options we can select to read, now let’s try to read ATMEL AT93C46 EEPROM firstly. Click “OK”.

Click “Read”.

EEPROM read successfully.


To save the data, click “save” button.

To program a key, we can turn to key page to select options.





Autel XP400 PC programmer installation full video:
https://youtu.be/CzBYHEsefTs


This is an quick operation tutorial for Autel XP400 Key And Chip Programmer installation. Thanks to https://www.auteldiag.com/

Source:https://www.auteldiag.com/service/how-to-setup-autel-xp400-pc-software.html

 https://www.auteldiag.com/service/how-to-setup-autel-xp400-pc-software.html

Autel MaxiCOM MK906BT Vs. MaxiSys MS906

Autel MaxiCOM MK906BT is an upgrade version diagnostic tool of Autel MaxiSys MS906 what is the difference between them? Auteldiag.com have made a comparison list for reference. here  you are:

Autel MK906BT vs. Autel MS906

Item	Autel MK906BT	Autel MS906
Image
All Systems Diagnoses	√	√
Bi-directional Control	√	√
Auto VIN Technology	√	√
ECU coding	√	–
Service Function	√	√
MaxiFix Cloud-based Info System	√	√
Data Manager	√	√
Shop Manager	√	√
Remote Support	√	√
Print	√	√
Wireless VCI	√	–
Battery	10000 mAh 3.7 V	5000 mAh 3.7 V
Memory Storage	32GB	32GB
Wi-Fi	2.4GHz	2.4GHz
Oscilloscope(add on)	√	–
Inspection Camera(add on)	√	–
HDMI	√	–
ADAS	√	√
Display Size	8″	8″

 

Similarity

 

Autel MK906BT covers most of the functions that Autel MS906 had, including full system diagnoses, bi-directional control, maintenance service function(oil reset, TPMS, EPB/ABS/SRS/SAS/DPF/BMS, brake bleed, IMMO, injector coding, etc.), auto VIN technology, data manager, shop manager and more.

 

Difference

 

Autel MaxiCOM MK906BT supports ECU coding, wireless VCI, oscilloscope, inspection camera, HDMI while Autel MS906 does not. Besides, Autel MK906BT has faster wireless pairing, longer Bluetooth range(164ft/50m), and battery life(10000 mAh 3.7 V) than Autel MS906.

 

Conclusion

 

Autel MaxiSys MS906 Automotive Diagnostic Tool is suitable for mechanics or small garage who need a professional scan tool with full system diagnoses and maintenance services for routine work.

 

Autel MaxiCOM MK906BT OBD2 Diagnostic Scanner is suitable for technicians or car repair shop who needs a comprehensive diagnostic tool covering ECU coding and some advanced features.

 

How To Use Autel IM608 Pro To Catch The System Logs?

 

Question

I have met some network issues when using the Autel MaxiIM IM608 Pro diagnostic tool. How can I do? Please help me!

 

The solution from Auteldiag.com engineer:

Go to Maxitool to send the system logs to the back end. Therefore, Autel engineers can further check what is the reason. For customers who met software crush issues or other apk issues can also catch the system logs in same way.

 

Procedure:

Step 1: go back to main page of Autel IM608Pro when function failure.

 

Step 2: press MaxiTools apk to catch the system logs, then upload.

 

Step 3: Log >> Start, press “Start” to catch the logs of failure function.

 

Log collection, please wait…

 

Step 4: press “Upload” to send the datalog to Autel server when collection was done.

 

Wait until uploading completed. Please provide your IM608 Pro device series number at same time, the Autel tech support will help you.

 

These steps are applied to the Autel IM608 OBD2 scanner as well.

Done!

http://blog.auteldiag.com/