Purpose:Autel IM608 Reset Key
Car model and year:Honda Accord 2010
Tool used:Autel MaxiIM IM608 key programmer
Procedure:
Firstly, connect Autel IM608 with OBD of vehicle, press
IMMO >> Accept >> VIN >> Auto detect >> Manual selection >> Accord >> Blade key >> Immobilizer(Honda)
Turn the ignition off, press “OK”.
Turn the ignition on, press “OK”.
The 4th generation immobilizer, press “OK”.
Key >> Reset key
Car model and year:Honda Accord 2010
Tool used:Autel MaxiIM IM608 key programmer
Procedure:
Firstly, connect Autel IM608 with OBD of vehicle, press
IMMO >> Accept >> VIN >> Auto detect >> Manual selection >> Accord >> Blade key >> Immobilizer(Honda)
Turn the ignition off, press “OK”.
Turn the ignition on, press “OK”.
The 4th generation immobilizer, press “OK”.
Key >> Reset key
- The registration or the clearance of the key will be recorded by this function.
- At least one registered key is required to reset all key steps.
- Please inset a registered key and turn on the ignition.
Press “OK”.
Enter the number of keys that needs to be reset, press “OK”.
It will turn the ignition off and on automatically.
Follow the prompts to operate:
Turn the ignition off within 20s.
Turn on the ignition using another key within 20s.
Turn the ignition off within 20s.
Turn the ignition on using the same key within 20s.
It will turn the ignition off and on automatically again.
Does the immobilizer indicator lamp go out? Press “Yes”.
Turn the ignition off.
Turn the ignition on using a registered key.
The registration of the key is completed.
Turn the ignition off, press “OK”.
Check all keys to ensure all of them can start the engine. Press “OK”.
Turn the ignition on, press “OK”.
Reset key has done!
Add info:
Autel MaxiIM IM608 key programmer supports to reset a key for Honda Accord 2010. Besides, IM608 can program add key, all key lost, remote learning for Accord vehicles as below:
Autel IM608 Honda Accord IMMO Vehicle List
Enter the number of keys that needs to be reset, press “OK”.
It will turn the ignition off and on automatically.
Follow the prompts to operate:
Turn the ignition off within 20s.
Turn on the ignition using another key within 20s.
Turn the ignition off within 20s.
Turn the ignition on using the same key within 20s.
It will turn the ignition off and on automatically again.
Does the immobilizer indicator lamp go out? Press “Yes”.
Turn the ignition off.
Turn the ignition on using a registered key.
The registration of the key is completed.
Turn the ignition off, press “OK”.
Check all keys to ensure all of them can start the engine. Press “OK”.
Turn the ignition on, press “OK”.
Reset key has done!
Add info:
Autel MaxiIM IM608 key programmer supports to reset a key for Honda Accord 2010. Besides, IM608 can program add key, all key lost, remote learning for Accord vehicles as below:
Autel IM608 Honda Accord IMMO Vehicle List
Vehicle Model | System | Add Key | All Key Lost | Remote Learning | IMMO Part Replacement |
Accord | Touch-tone smart card(Honda) | Support by OBD | Support by OBD | × | Replace ECM/PCM, Replace MICU |
Accord | Immobilizer(Honda)(Blade Key) | Support by OBD | Support by OBD | Support by OBD | ECM, Immobilizer unit & ECM/PCM, Replace ECM/PCM, Replace MPCS/MICU/IMOES, Replace immobilizer unit |
Accord | Knob-style smart card(Honda) | Support by OBD | Support by OBD | × | Replace ECU of the smart key, Replace ignition knob |
没有评论:
发表评论