MaxiIM IM608 add key for Toyota Auris 2007 Via OBD

 

This post show you guide on how to use  Autel IM608 key programmer to add a blade new key for Toyota Auris 2007

Procedure
Connect Autel IM608 Tablet to your car via OBD
Insert the working blade key into the key slot
Turn the key into position 1.

IMMO >> Accord >> Blade key >>Europe >>AURIS HV >>Blade key











System data initizlizing.please wait...
Then confirm vehicle profile,tab YES to continue

Tab IMMO Status scan
Turn the ignition on while Establishing vehicle communication


Communication status Tips
The tester can not communicate with the vehicle ECU

• 1. Confim the ignition swith is turned on
• 2.Check the test cable is connected well
• 3.Check the vehicle battery has power
• 4.Confirm if the vehicle is equiqqed with this system
• 5.Decribe your proble and upload you log .

Tab ESC

Tab IMMO Status scan again
Establishing vehicle communication...




>> Add Key>> start


Step1 Master key verfication


Add key guided : insert the learned master key and turn the igition on press OK to contiue
Step2 Key programmming

Add key guided : Remove the key , insert the key to be learned into the iginiation lock (Just insert the key in the
off position and do not turn it to the on position!)wait for about 75s...


Add Key succeed !then Tab ESC


Tab Rescan,here has two master keys 



Check the new blade, it work!Autel IM608 add Toyota Auris 2007 New Key succeed!
Done!

https://www.autelim608.co.uk/

Autel MaxiIM IM608 For Honda Accord resetting Key & IMMO Car List

 

Purpose:Autel IM608 Reset Key
Car model and year:Honda Accord 2010
Tool used:Autel MaxiIM IM608 key programmer
Procedure:
Firstly, connect Autel IM608 with OBD of vehicle, press
IMMO >> Accept >> VIN >> Auto detect >> Manual selection >> Accord >> Blade key >> Immobilizer(Honda)





Turn the ignition off, press “OK”.
Turn the ignition on, press “OK”.

The 4th generation immobilizer, press “OK”.

Key >> Reset key

1. The registration or the clearance of the key will be recorded by this function.
2. At least one registered key is required to reset all key steps.
3. Please inset a registered key and turn on the ignition.

Press “OK”.

Enter the number of keys that needs to be reset, press “OK”.




It will turn the ignition off and on automatically.

Follow the prompts to operate:

Turn the ignition off within 20s.

Turn on the ignition using another key within 20s.

Turn the ignition off within 20s.

Turn the ignition on using the same key within 20s.

It will turn the ignition off and on automatically again.

Does the immobilizer indicator lamp go out? Press “Yes”.





Turn the ignition off.
Turn the ignition on using a registered key.

The registration of the key is completed.
Turn the ignition off, press “OK”.




Check all keys to ensure all of them can start the engine. Press “OK”.

Turn the ignition on, press “OK”.

Reset key has done!

Add info:
Autel MaxiIM IM608 key programmer supports to reset a key for Honda Accord 2010. Besides, IM608 can program add key, all key lost, remote learning for Accord vehicles as below:

Autel IM608 Honda Accord IMMO Vehicle List

Vehicle Model	System	Add Key	All Key Lost	Remote Learning	IMMO Part Replacement
Accord	Touch-tone smart card(Honda)	Support by OBD	Support by OBD	×	Replace ECM/PCM, Replace MICU
Accord	Immobilizer(Honda)(Blade Key)	Support by OBD	Support by OBD	Support by OBD	ECM, Immobilizer unit & ECM/PCM, Replace ECM/PCM, Replace MPCS/MICU/IMOES, Replace immobilizer unit
Accord	Knob-style smart card(Honda)	Support by OBD	Support by OBD	×	Replace ECU of the smart key, Replace ignition knob

 https://www.autelim608.co.uk/