Autel IM608 add 2020 2021 Nissan Rogue keys OK

 

How to add keys for latest Nissan Rogue via OBD?
Here is taking Autel IM608 to program a 2020 Nissan Rogue as example.
Connect IM608 with car OBD2 port.
Having been identified car model, go to

• Control unit >> Immo/ smart system >> Immobilizer remote control learning >> Key learning

Perform this function will delete all the smart keys, it can program up to 4 smart keys!
Press “Yes” to continue.

Close all the doors and click the START button.

IM608 will read the vehicle’s BCM code automatically.
Press “Yes” to continue.

Turn off the ignition and turn on the emergency flasher.

Open and close the door once.

Press START button once, keep the logo side of a new smart key cling to car START button, then the dashboard is illuminated and the indicator light flashed 5 times.
Note: if the indicator light doesn’t go out, please use a working key to press the START button.


Switch ignition off.

Program success.
Press “Yes” to go on next one.
Only to repeat same operations for the original key.

Press “No” when programming completed.

Press the START button within 5s to put the key mark of the first programmed smart key close to START button. The buzzer rings continuously, turn off ignition.

One more time for the other key.
Registration is completed.

Check if the remote control is operating properly.
Start the engine and wait for 5s.
Both can work well.
Done!


Use Autel IM608 to add keys for 2020 Nissan Rogue successfully.

IM508/ IM608 Nissan Rogue(NA) IMMO Functions List

Year	System	Add keys	All keys lost	Read password	Remote learning	IMMO part replacement
2018/01	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)
2018/02-2018/12	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)
2019	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)
2020/01	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)
2020/02-2020/12	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)
2021-	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)

 Source:https://www.auteldiag.com/service/autel-im608-add-keys-for-nissan-rogue-via-obd.html

MaxiIM IM608 add key for Toyota Auris 2007 Via OBD

 

This post show you guide on how to use  Autel IM608 key programmer to add a blade new key for Toyota Auris 2007

Procedure
Connect Autel IM608 Tablet to your car via OBD
Insert the working blade key into the key slot
Turn the key into position 1.

IMMO >> Accord >> Blade key >>Europe >>AURIS HV >>Blade key











System data initizlizing.please wait...
Then confirm vehicle profile,tab YES to continue

Tab IMMO Status scan
Turn the ignition on while Establishing vehicle communication


Communication status Tips
The tester can not communicate with the vehicle ECU

• 1. Confim the ignition swith is turned on
• 2.Check the test cable is connected well
• 3.Check the vehicle battery has power
• 4.Confirm if the vehicle is equiqqed with this system
• 5.Decribe your proble and upload you log .

Tab ESC

Tab IMMO Status scan again
Establishing vehicle communication...




>> Add Key>> start


Step1 Master key verfication


Add key guided : insert the learned master key and turn the igition on press OK to contiue
Step2 Key programmming

Add key guided : Remove the key , insert the key to be learned into the iginiation lock (Just insert the key in the
off position and do not turn it to the on position!)wait for about 75s...


Add Key succeed !then Tab ESC


Tab Rescan,here has two master keys 



Check the new blade, it work!Autel IM608 add Toyota Auris 2007 New Key succeed!
Done!

https://www.autelim608.co.uk/

Autel MaxiIM IM608 For Honda Accord resetting Key & IMMO Car List

 

Purpose:Autel IM608 Reset Key
Car model and year:Honda Accord 2010
Tool used:Autel MaxiIM IM608 key programmer
Procedure:
Firstly, connect Autel IM608 with OBD of vehicle, press
IMMO >> Accept >> VIN >> Auto detect >> Manual selection >> Accord >> Blade key >> Immobilizer(Honda)





Turn the ignition off, press “OK”.
Turn the ignition on, press “OK”.

The 4th generation immobilizer, press “OK”.

Key >> Reset key

1. The registration or the clearance of the key will be recorded by this function.
2. At least one registered key is required to reset all key steps.
3. Please inset a registered key and turn on the ignition.

Press “OK”.

Enter the number of keys that needs to be reset, press “OK”.




It will turn the ignition off and on automatically.

Follow the prompts to operate:

Turn the ignition off within 20s.

Turn on the ignition using another key within 20s.

Turn the ignition off within 20s.

Turn the ignition on using the same key within 20s.

It will turn the ignition off and on automatically again.

Does the immobilizer indicator lamp go out? Press “Yes”.





Turn the ignition off.
Turn the ignition on using a registered key.

The registration of the key is completed.
Turn the ignition off, press “OK”.




Check all keys to ensure all of them can start the engine. Press “OK”.

Turn the ignition on, press “OK”.

Reset key has done!

Add info:
Autel MaxiIM IM608 key programmer supports to reset a key for Honda Accord 2010. Besides, IM608 can program add key, all key lost, remote learning for Accord vehicles as below:

Autel IM608 Honda Accord IMMO Vehicle List

Vehicle Model	System	Add Key	All Key Lost	Remote Learning	IMMO Part Replacement
Accord	Touch-tone smart card(Honda)	Support by OBD	Support by OBD	×	Replace ECM/PCM, Replace MICU
Accord	Immobilizer(Honda)(Blade Key)	Support by OBD	Support by OBD	Support by OBD	ECM, Immobilizer unit & ECM/PCM, Replace ECM/PCM, Replace MPCS/MICU/IMOES, Replace immobilizer unit
Accord	Knob-style smart card(Honda)	Support by OBD	Support by OBD	×	Replace ECU of the smart key, Replace ignition knob

 https://www.autelim608.co.uk/

How to use Autel MaxiTPMS TS508 Program MX-Sensors

 This is a tech tip of how to use Autel MaxiTPMS TS508 to program four 433Mhz TPMS MX-Sensors for a 2005-2012 Lexus GS series at the same time.

Preparation
Put the 4 Autel MX-Sensors near TS508 tool.


Steps:

Advanced mode >> Lexus >> GS series >> 01/2005-12/2011(433Mhz)(GS32)



Program sensor >> Auto create 1-16 sensors

Keep programming sensor within 4 inches, start checking...




4 sensors detected. Do you want to continue? Press “Yes”.

4 sensors programming...

Programming successfully! Sensors information were display.



It is quite fast and easy to use Autel TS508 TPMS Tool programming 4 sensors in 1 minutes.

https://www.auteldiag.com/service/how-to-use-autel-ts508-program-mx-sensors.html

Can Autel mk808 program Toyota Lexus keys?

 Yes!Autel MK808 Immo keys Function: Confirmed! Add New Keys to Toyota!

Today, we Auteldiag.com engineers has confirmed the immobilizer function of Autel MaxiCOM MK808! 

100% tested on a Toyota Lexus and ifs working.

Purpose: make an extra key
Car model :Toyota Lexus RX300 North America 1999
Tool option:Autel MaxiCOM MK808


This is a master key for the Toyota Lexus RX300, I’m gonna use the Autel MaxiCOM MK808 diagnostic scanner to make an extra key here. So let’s start:

Connect MK808 scanner to OBD2 port of Lexus,

Service >> Immo keys >> Lexus >> Manual selection >> RX300 >> North America >> 1999 >> Yes

    

 

Hot functions >> Auto remote match >> Immobilizer >> Transponder code registration

   

 

Use this function to register a new key code, press “OK”.

 

This function serves to register an immobilizer key.

Note: If any step exceeds the time limit, transponder code registration will fail. Press “Next”.

 

Remove the key from the key cylinder, insert a registered master key into the key cylinder and turn the ignition on. Select “Sub key” to register, press “Next”.

  

 

Remove the master key form the key cylinder within 20s, then press “Next” immediately.

 

Press “Next” after inserting a new key into the key cylinder within 10s.

 

Now registering...

 

Wait for about 70s...

 

Transponder code registration is completed. Press “Esc” to exit.

 

Now let’s test the new key, it should start the car. Alright, it start it up successfully.

 

 

As you can see, Autel MK808 key programmer does program a new key for Toyota Lexus RX300, key programming has done in 4 minutes.

 Copyright @http://blog.auteldiag.com/toyota-lexus-rx300-1999-add-a-key-via-autel-mk808/